General Description

The Two- and  Three Screw pumps are used to pump

oils or other lubricating liquids, non-lubricating liquids, or

liquids with poor lubricating properties. The characteristics of the screw

pumps are:

self-priming, very high efficiency,

very low noise level and very well suited for use with

variable speed drives (FU). The liquid is moved fully

continuously, virtually without pulsations, without turbulence,

crushing, or loss of lubrication.

Functionality

Single- / -double channel, self-priming; the spindles have special

shapes that create sealed chambers, the contents of which

are continuously moved in an axial direction from the suction

side to the pressure side as the spindles rotate. Despite rotation

of the spindles, no turbulence results.

The uniform chamber volumes eliminate crushing forces

General Description

Centrifugal Pumps are used to pump neutral or aggressive

liquids, pure or contaminated liquids, cold or hot liquids,

toxic, and environmentally hazardous liquids like water,

hot water, lubrication oils, emulsions, thermal oils, and

chemical products.

Functionality

Single-channel, not self-priming, flow rates according to

EN 733 or EN 22858/ISO 2858. Additional sizes expanded

the EN performance ranges. Pump series are constructed

in a modular design.

General Description

Propeller pumps are used to pump neutral

or aggressive liquids, pure or contaminated liquids, cold or

hot liquids, and even pumped liquids with suspended solids.

Main Uses

Used to pump large volumes with a relatively short pump head up to 10 m.

General Description

Used to pump or meter thin to highly viscous liquids,

pasty, neutral or aggressive, pure or abrasive liquids,

gaseous liquids or liquids that tend to foam,

even liquids with fibrous and solid components.

Functionality

Self-priming progressing cavity pump, the pumping elements

of which are the rotating rotor and the stationary stator.

The special shape of these two parts creates sealed

chambers, the contents of which are continuously moved

in an axial direction from the suction side to the pressure

side. Despite rotation of the rotor, no turbulence results;

the consistent  chamber volume eliminates crushing forces.

General Description

Used to pump or meter thin to highly viscous liquids,

pasty, neutral or aggressive, pure or abrasive liquids,

gaseous liquids or liquids that tend to foam,

even liquids with fibrous and solid components.

Functionality

Dry self-priming, gasketless and valveless..

General Description

Used to chop solids and produce pumpable liquids that contain

fibers and solids.

Functionality

A cutting wheel with exchangeable, highly wear resistant cutting discs.

Depending on the type, static pressure head is 3 to 5 meters.